Showing posts with label groundwater. Show all posts
Showing posts with label groundwater. Show all posts

Friday, October 16, 2009

Protect Yourself From Water Damage and Floods





Source: Federal Alliance for Safe Homes


Floods are one of the most powerful, deadly, and destructive natural disasters.

There are a number of relatively inexpensive steps you can take to protect your home and property before a flood strikes.

If you are building or retrofitting your home consider these recommendations:



Elevate your home
  • Consider wet flood proofing An example of wet flood proofing is installing flood vents that create permanent openings in the foundations walls so water can flow through the structure.
  • Dry flood proofing prevents floodwaters from entering the building. Install new brick veneer over asphalt coating and apply polyethylene film over existing walls.
  • Construct non-supporting, break-a-way walls designed to collapse under the force of water without causing damage to the house or its foundation.


Additional Recommendations
Here are some additional recommendations to protect your home from floods. Some are simple and inexpensive; others require a professional contractor.

  • Locate the main electric panel and elevate all electric outlets, switches, light sockets, baseboard heaters and wiring at least 12" above the projected flood elevation. In areas that could get wet, connect all receptacles to a GFI circuit to avoid the risk of shock or electrocution. Have electrical wiring done by a licensed electrician.
  • Elevate the furnace, water heater, washer and dryer, outside air conditioning compressor, heat pump or package unit at least 12" on a base of masonry, concrete or pressure treated lumber.
  • Anchor fuel tanks securely to the floor. Make sure vents and fill line openings are above projected flood levels.
  • Install a floating floor drain plug at the current drain location. If the floor drain backs up, the float will rise and plug the drain. Also have a licensed plumber install an interior or exterior backflow valve to prevent floodwater causing sewage to back up and enter your home. As a last resort, use large corks or stoppers to plug showers, tubs or basins.



Get Flood Insurance
One of the most important things you can do to protect your home and family before a flood is to purchase a federal flood insurance policy. But don't wait until a flood is coming. It normally takes 30 days after purchase for flood insurance to go into effect. 



Have flooding or water damage that requires immediate response?

Advanced Restoration staff is On-Call 24 hours a day, 7 days a week to respond to your water damage/flood situation.  We understand that the sudden intrusion of water is not something that anyone can be totally prepared for.  You will always talk to one of our knowledgeable, caring team members, day or night.  If we are unable to assist you, we will offer you our best professional advice.  At Advanced Restoration, we pride ourselves on immediate response to all types of water damage situations. Our coverage area includes Nassau  and Suffolk County, NY and the NY boroughs. Call Us at (800) 693-6263.

Friday, September 11, 2009

Basement Flooding/Heavy Rains in NY

Source: Institute for Business & Home Safety

Heavy rains are pounding Long Island today, which will cause flooding throughout Nassau and Suffolk counties.



Basement flooding can be a problem in some homes, and there are steps to take to minimize potential damage. But since a flooded basement can result from a number of things, there is no single method for prevention. The most important things are to determine:


1) When is the basement flooding?

Does the basement flood every year at approximately the same time?
Does the basement flood during random intervals?



2) Where is the basement flooding?
If water is entering near the top of the wall in one location:
-An improperly sloped landscape angled toward the house could be the cause.
-Extend and re-direct the downspouts.
-Reshape the landscaping around the foundation of the home.



Inspect the location where water is entering:
Caulk any cracks on the interior.


If the entire wall is damp or water is entering through multiple wall surfaces, this may be a sign of a faulty or missing water proofing membrane.

Remove soil around the foundation.

Hire a licensed contractor to install a waterproofing membrane.

Consider applying an internal sealant that can be painted on interior surface of basement walls:

This is not an option for finished basement walls.

These products require constant maintenance or they will stop working.
If the water appears to be entering the home near the foundation or through a floor drain:



French Drainage


One solution is to install a “French Drainage” system around the perimeter of the home or at least in areas subject to frequent flooding.
-Remove the soil around the perimeter of the home.
-Waterproof the foundation wall with a waterproofing membrane.
-Install a French Drain at the base of the foundation:
-Ensure that the drain has a method for diverting the water.
-The drain should empty into the primary storm drainage system, a retention pond or other source.
-Backfill the area with gravel to provide adequate drainage.
-Install a sump pump with a battery backup:
-This requires demolition of a portion of the basement floor.



To be effective, the sump pump needs to be hooked up to a drainage system, usually installed around the perimeter of the basement foundation, or at least in areas subject to repeated flooding.
Because this is installed at the perimeter of the foundation, the flooring in this area will also face demolition to install the drainage system.



Sump pumps should be tested at least once a year, preferably in the early spring.



Test the system if a storm is approaching.
Make sure the sump pit does not contain any debris that will clog the sump’s inlet pipe.



Pour water into the sump pit until the sump turns on (about 5 gallons of water).
If the sump does not turn on contact a professional to diagnose the problem.






Advanced Restoration Corporation is a family-owned and operated full-service property damage restoration company with a combined 75 years experience in dealing with Fire Damage Restoration, Water Damage Restoration, Flood & Storm Damage, Mold Remediation, Smoke Damage Restoration and Reconstruction. We service Long Island (Nassau County, NY; Suffolk County, NY) and the New York Metro area.


When disasters strike, Advanced Restoration is ready to respond 24 hours a day, 7 days a week. You are guaranteed to speak with one of our knowledgeable, caring team members, day or night. Our immediate response to a claim/property loss helps minimize the damages to the structure, contents, and ease the sometime catastrophic effect that a disaster may have on an owner or occupants. Please call us with any questions at (800)693-6263.





Friday, July 10, 2009

Who Will Be Open For Business if Disaster Strikes?


Contact:Brenda O'Connor
(813) 675-1043


TAMPA – Large and small businesses alike are having a difficult time in the current economy and the Institute for Business & Home Safety (IBHS) is concerned many may not be open for business if disaster strikes.

According to the Association of Contingency Planners, Business Continuity Awareness Week was June 21-27, and IBHS wants business owners and managers to take advantage of free resources that are available to create business continuity plans that can help keep operations running when the unexpected happens.

In addition to minimizing the impact of severe weather events or problems such as a water main break or regional power outage, business continuity planning requires a thorough assessment of operations, which often yields additional benefits including opportunities to streamline functions or identifying areas for cost reductions.

IBHS outlines the following five steps to begin safeguarding operations:

1. Record basic information for employees, ownership, suppliers, vendors and key contacts.
2. Identify critical business functions (i.e., what is required to maintain income, keep a competitive advantage, and meet regulatory or contractual obligations?).
3. Scout alternate locations (i.e., where is the best site to resume operations?).
4. List what is needed to fulfill critical business functions at an alternate location, including records, critical telephone numbers, e-mail addresses, equipment, machinery and vehicles.
5. Identify equipment and services that workers will need, such as computer equipment and software, voice and data communications, and required office supplies.

The IBHS Open for Business® suite of resources is available in multiple formats on DisasterSafety.org and includes worksheets and checklists to help with development of your plan. There also is an online training series for those who prefer being walked-through the process one step at a time, with an option for reminder e-mail messages to keep planning on track.
___________________________________________________
Advanced Restoration Corporation is a family-owned and operated full-service property damage restoration company with a combined 75 years experience in dealing with Fire Damage Restoration, Water Damage Restoration, Flood & Storm Damage, Mold Remediation, Smoke Damage Restoration and Reconstruction. We service Long Island (Nassau County, NY; Suffolk County, NY) and the New York Metro area.
When disasters strike, Advanced Restoration is ready to respond 24 hours a day, 7 days a week. You are guaranteed to speak with one of our knowledgeable, caring team members, day or night. Our immediate response to a claim/property loss helps minimize the damages to the structure, contents, and ease the sometime catastrophic effect that a disaster may have on an owner or occupants.

Thursday, June 18, 2009

Water Damage, Floods & Heavy Rains Pummel NY!


The National Weather Service has issued a FLASH FLOOD WATCH for portions of New York and New Jersey from until 8 p.m. on Thursday.


A FLASH FLOOD WATCH means that conditions may develop that lead to flash flooding. Flash flooding is a very dangerous situation. One to two inches of rainfall is expected. Locally higher amounts are possible especially in areas affected by thunderstorms.

TRACK WATCHES AND WARNINGS
There is also an urban flood advisory for Nassau and Suffolk counties until 4:45 p.m.
Recent heavy rainfall has left soil conditions around the New York City metropolitan area and northern New Jersey saturated.

Forecasters are predicting one to two inches into early Thursday evening, with higher amounts from thunderstorms. Streams could rise, particularly along the Raritan and Passaic river basins.
Check your basements for water damage...
Water Source Categories
Category 1: Often referred to as “clean” waterA “clean” water source is one that does not pose substantial harm to humans. Examples of clean water sources may include, but are not limited to: broken water supply lines, tub or sink overflows with no contaminants, appliance malfunctions involving water supply lines, melting ice or falling rainwater – not that which flows over the soil or through multiple structural components- broken toilet tanks, and even toilet bowls that do not contain contaminants or additives. Once a clean water source contacts other surfaces and materials, its condition may change as it dissolves or mixes with soils and other contaminants, and as time elapses.

Category 2: Often referred to as “gray” water Unsanitary or “gray” water contains some degree of contamination. Potentially, it could cause substantial discomfort or sickness if consumed by humans, and it carries microorganisms or nutrients for microorganisms. Category 2 (gray) water examples may include, but are not limited to: discharge from dishwashers or washing machines, overflows from washing machines, overflows of toilet bowls with some urine (no feces), broken aquariums, and punctured water beds. All of these may contain chemicals or biocontaminants (fungal, bacterial, viral, algae), or other forms of contamination. Time and temperature aggravate Category 2 (gray) water contamination significantly. Water in flooded structures that remains untreated longer than 48 hours can change from Category 2 (gray) to Category 3 (black).
Category 3: Often referred to as “black” waterCategory 3 “black” water always contains pathogenic agents. Grossly unsanitary, “black” water sources are those that arise from sewage or other contaminated water entering a structure. Sewage contains the expected urine and feces; but it could also contain dangerous chemicals or medical wastes. Toilet backflows that originate from beyond the toilet trap are considered to be Category 3 (black) water situations, regardless of visible content or color. This category includes all forms of sea water, ground surface water, and rising water from, rivers or streams. They carry silt and organic matter into structures and create Category 3 ”black” water situations. In situations where structural materials and / or contents have been heavily contaminated with such materials as pesticides, heavy metals, or toxic organic substances; the water damage is considered to be Category 3 (black) water.
If you have flooding or water damage from the storms hitting the NY Metro area, contact a reputable property damage restoration company. Advanced Restoration Corporation is a preferred vendor for insurance companies and is available 24/7 to respond to any disaster situation. Call them today at (800) 693-6263, or visit them on the web at www.AdvancedRestoration.com.

Monday, April 20, 2009

Real Estate Deals & Mold in Homes





If the home you are thinking about purchasing has mold, do not panic!

You can remove unusual mold levels from the home, and bring it back to the original condition.
It is impossible to completely eliminate all mold and mold spores indoors. Mold will always be found floating in the air and in house dust. Indoor mold growth can be prevented by controlling water and moisture indoors.


The following may prevent or reduce indoor mold growth:

-Repair any water leaks.
-Provide good air circulation.
-All HVAC systems should have a good electrostatic filter on the return.
-Use bathroon, laundry and kitchen exhaust fans.
-Insulate and ventilate attic and crawl space areas.
-Clean, dry or remove items that are damaged by water immediately.

An integral part of the mold clean-up process is the clearance testing. This final testing procedure provides confirmation that the project has been satisfactorily remediated and that the contamination has not spread to other areas.

Remember...If there is mold growth in your home, you must clean up the mold and fix the water problem. If you clean up the mold, but do not eliminate the water problem, the mold will grow back! For more information, contact a restoration company that specializes in mold removal.

_____________________________________________________________

Advanced Restoration Corporation is a family-owned and operated full-service property damage restoration company with a combined 75 years experience in dealing with Fire Damage Restoration, Water Damage Restoration, Flood & Storm Damage, Mold Remediation, Smoke Damage Restoration and Reconstruction. We service Long Island (Nassau County, NY; Suffolk County, NY) and the New York Metro area.

Friday, January 9, 2009

Winter Storm/Property Damage: Ice Dams and Your Home


Snow is expected this weekend on Long Island and the NY Metro area and the Weather Service has issued a WINTER STORM WARNING for the area. Whenever there is snow, you are guaranteed to have troublesome ice dams to follow. Ice dams can cause major water damage and flooding to your home, which requires immediate attention.

As winter advances through cycles of freezing and thawing, buildings and homes experience ice buildup and roof damage. In general, ice dams are formed when attic heat moves up to warm the roof and melts snow at or near the ridge. Snow melts, runs downward and hits the edge of the cold roof, resulting in re-freezing snow. These cycles cause ice to accumulate and back up under shingles. Damage appears in the form of soaked insulation, stained, cracked and damaged sheet rock, damp, smelly, rotting wall cavities and stained, blistered and peeling paint.

Preventing Ice Dams
To prevent an ice dam, don't heat the roof, keep it cold. That way, the snow on the roof eventually dissipates without making large amounts of meltwater. The underside of the roof deck should not exceed 30 F. The best way to maintain low temperatures is by ensuring that there is adequate insulation and sealing gaps that let warm air pass into the attic from the house. The attic must also be ventilated, so that cold air is introduced into it and heated air escapes rapidly. Some remodeling contractors are under the impression that heat passing through the attic helps prevent ice dams, when just the opposite is true. Although excess heat moving from the attic through the roof rapidly melts snow, once the meltwater touches the cold eaves, it quickly freezes and forms an ice dam.

If you have a furnace in the attic, it may not be possible to prevent ice dams. Increased insulation, however, should help. First, insulate the areas between the roof rafters. It is important to keep an air space between the roof deck and the insulation in order to prevent a condensation buildup that can delaminate the roof deck. Prior to insulating, install polystyrene rafter air channels, which are available at home centers. Next, lay insulation blankets over the furnace's heating ducts to help reduce the heat buildup in the attic. If there's a hatchway into the attic, build a cover for it out of rigid poly-styrene insulation.

If the gable and ridge vents do not generate sufficient air movement to dissipate the heat, you will need a motorized vent at one end of the attic to exhaust the heat, and an adequately sized vent on the opposite end of the attic to draw in cold air from the outside.

Check your home carefully when ice dams form. Investigate even when there doesn't appear to be a leak. Look at the underside of the roof sheathing and roof trim to make sure they haven't gotten wet. Check the insulation for dampness. And when leaks inside your home develop, be prepared. Water penetration often follows pathways difficult follow. Don't just patch the roof leak. Make sure that the roof sheathing hasn't rotted or that other less obvious problems in your ceiling or walls haven't developed. And then detail a comprehensive plan to fix the damage. But more importantly, solve the problem.

If you experience water damage that requires a water damage/flood restoration expert, please contact Advanced Restoration at (800) 693-6263. Advanced Restoration is a full service property damage restoration company that can respond 24/7 to your water damage situation. We use state-of-the-art equipment to handle structural drying. Our professional staff is also available to handle mold situations that may occur as a result of a water loss.
Our service area includes Nassau County, Suffolk County and the New York boroughs.
Enjoy the snowfall and stay dry!

Tuesday, December 9, 2008

Going Green Around the Holidays



Every day, more and more Long Island businesses and homeowners are "going green" in order to provide a healthier environment for residents of Nassau & Suffolk County.

The world has a fixed amount of natural resources, some of which are already depleted. So as population growth greatly strains our finite resources, there are fewer resources available. If we intend to leave our children with the same standard of living we have today, we must preserve the foundation of that standard of living. Saving clean air, water, fuel sources and soil for future generations is essential, and everyone needs to start thinking green.

Some of the greatest threats to future resources come from things we throw away everyday. Household batteries and electronics often contain dangerous chemicals that may, if sent to a local landfill, leak through the bottom barrier and pollute the groundwater. This can contaminate everything from the soil in which our food grows, to the water which will eventually come out of aquifers and into our tap water. Many of these chemicals cannot be removed from the drinking water supply, nor from the crops that are harvested from contaminated fields. The risks to human health are tremendous and educating the public will help to alleviate those risks.

Simple ways to increase the energy efficiency of a home during the building or remodeling process include:

Lights
Turn off unnecessary lights , indoors and outdoors, to conserve electricity. Install lighting timers or sensors to automatically turn off lights when not needed.

High-Efficiency Heating/Cooling System
Installing high efficiency heating and cooling equipment also conserves electricity. Use programmable thermostats to minimize energy use, especially when no one is home.

High-Efficiency Windows and Appliances
High-efficiency windows reduce heating and cooling costs by minimizing the impact the outside environment has on a home.

Low-Water Consumption Fixtures
Low-consumption or dual-flush toilets, low-consumption or waterless urinals, and low-flow bathroom, sink and shower faucets all help to reduce water use.

Fluorescent Bulbs
Using compact, fluorescent bulbs use less power and last longer than conventional bulbs.

Advanced Restoration recently joined various green organizations and is looking to explore green relationships in New York with other business entities.